# Feasibility of Rectangular Charcoal Gasifiers **URL:** http://forum.driveonwood.com/t/feasibility-of-rectangular-charcoal-gasifiers/1680 **Category:** Charcoal Gasification **Created:** [May 17, 2015, 9:03pm UTC](http://forum.driveonwood.com/t/feasibility-of-rectangular-charcoal-gasifiers/1680 "2015-05-17T21:03:06Z") **Posts on this page:** 1 **Showing post:** 17
### Author: ![marcin\_ose](http://forum.driveonwood.com/user_avatar/forum.driveonwood.com/marcin_ose/32/12073_2.png) [@marcin\_ose](http://forum.driveonwood.com/u/marcin_ose) #### Post date: [June 1, 2015, 10:31pm UTC](http://forum.driveonwood.com/t/feasibility-of-rectangular-charcoal-gasifiers/1680/17 "2015-06-01T22:31:43Z")
I’m glad to report that we are shooting for the 8"x36"x36" gasifier, and we are moving forward with the gasifier workshop - [Facebook](https://www.facebook.com/OpenSourceEcology/posts/10153945206771562) . Does anyone have technical plans available for a continuous DIY charcoal production system? I’ve seen the discussion at [Making charcoal continuously - #8 by freedombiomass](http://forum.driveonwood.com/t/making-charcoal-continuously/1636/8) . We are considering a taller system that augers wood into the top, and augers charcoal out the bottom. But at the same time, it would be nice to wrap a helical 1/2" pipe heat exchanger around the flame for house heating. That would be great for winter house heat with combined fuel generation for MicroTractors and MicroCars. Marcin --- _[View the full topic](http://forum.driveonwood.com/t/feasibility-of-rectangular-charcoal-gasifiers/1680)._