# Gilmore style?
**URL:** http://forum.driveonwood.com/t/gilmore-style/899
**Category:** Charcoal Gasification
**Created:** [August 8, 2013, 11:37am UTC](http://forum.driveonwood.com/t/gilmore-style/899 "2013-08-08T11:37:12Z")
**Posts on this page:** 20
**Page:** 49
### Author:  [@KristijanL](http://forum.driveonwood.com/u/KristijanL)
#### Post date: [August 3, 2016, 11:34am UTC](http://forum.driveonwood.com/t/gilmore-style/899/961 "2016-08-03T11:34:00Z")
What Koen sayd. It is possible to make a lot of fuels this way, methane, gasoline, diesel, paraffin wax, alcohols etc… with different catalysts, pressures, H2 to CO ratio, temperature… My grandfather told me during the ww2 Germans made margarine out coal, dint belive him untill l met with FTP.
The byproducts are water and heat.
---
### Author:  [@trigaux](http://forum.driveonwood.com/u/trigaux)
#### Post date: [August 3, 2016, 1:26pm UTC](http://forum.driveonwood.com/t/gilmore-style/899/962 "2016-08-03T13:26:56Z")
Hi Koen
I am impressed by your plans and results
very impressive congratulation
[quote=“k\_vanlooken, post:942, topic:899”]
Trip update:
roundtrip 1980 KmFuel used: Bamboo Charcoal: 78 Kgs = Average 3.9 Kg/ 100 kmMixed in dual fuel ecu programmed injection for Non lean mixtureBamboo derived alcohol aka Methanol, purity 95%20 Liters = average 1 liter / 100 Kmwater drip for core temperature control: almost 20 liters = average 1 liter / 100 Km
have you been able to introduce mixture (Bamboo vinegar / Methanol) directly into the gasifier?
can be simpler than dual-fuel?
---
### Author:  [@k\_vanlooken](http://forum.driveonwood.com/u/k_vanlooken)
#### Post date: [August 3, 2016, 4:25pm UTC](http://forum.driveonwood.com/t/gilmore-style/899/963 "2016-08-03T16:25:15Z")
Hi Thierry,
No, the Methanol was injected in the manifold , with the normal injectors.
---
### Author:  [@trigaux](http://forum.driveonwood.com/u/trigaux)
#### Post date: [August 3, 2016, 8:32pm UTC](http://forum.driveonwood.com/t/gilmore-style/899/964 "2016-08-03T20:32:40Z")
why you choose to introducing methanol into the intake manifold in place of the gasifier?
---
### Author:  [@k\_vanlooken](http://forum.driveonwood.com/u/k_vanlooken)
#### Post date: [August 4, 2016, 1:58am UTC](http://forum.driveonwood.com/t/gilmore-style/899/965 "2016-08-04T01:58:07Z")
Hi Thierry,
The Methanol is derived from the original gas and also from the bamboo vinegar.
most of the byproducts in the process of making the methanol are already “clean” combustibles and or useable directly in the engines.
So, for my purposes, there is no need to transfer them back into syngas.
However, evaporating them , together with hot syngas, would create a “carburated” gas, as they did in the “old day’s”
---
### Author:  [@k\_vanlooken](http://forum.driveonwood.com/u/k_vanlooken)
#### Post date: [August 27, 2016, 12:44am UTC](http://forum.driveonwood.com/t/gilmore-style/899/966 "2016-08-27T00:44:12Z")
I have my little chipper up and running for the bamboo waste / fuel prep…
Its another candidate for a gasifier…
[ ](https://www.youtube.com/watch?v=S2k0yY7XQf4)
[ ](https://www.youtube.com/watch?v=8d4Yerdy994)
---
### Author:  [@k\_vanlooken](http://forum.driveonwood.com/u/k_vanlooken)
#### Post date: [September 7, 2016, 4:41am UTC](http://forum.driveonwood.com/t/gilmore-style/899/967 "2016-09-07T04:41:03Z")
Here charcoaling results:
    
---
### Author:  [@WyattBarnes](http://forum.driveonwood.com/u/WyattBarnes)
#### Post date: [September 9, 2016, 1:10am UTC](http://forum.driveonwood.com/t/gilmore-style/899/968 "2016-09-09T01:10:44Z")
Hi Koen, do you grind and screen your charred material?
---
### Author:  [@k\_vanlooken](http://forum.driveonwood.com/u/k_vanlooken)
#### Post date: [September 9, 2016, 6:24am UTC](http://forum.driveonwood.com/t/gilmore-style/899/969 "2016-09-09T06:24:05Z")
Hi Wyatt,
yes i do… ( short version )
using a fly screen, plastic , and chicken wire 1/2"
anything sized between those, i use… 😁
---
### Author:  [@k\_vanlooken](http://forum.driveonwood.com/u/k_vanlooken)
#### Post date: [September 10, 2016, 1:28pm UTC](http://forum.driveonwood.com/t/gilmore-style/899/970 "2016-09-10T13:28:24Z")
New toy arrived, playing already…
How hot can it be inside 🤔
Upgrading and testing from charcoal…
up to 1400 degree celcius… and some more applications 😁
---
### Author:  [@MikeR](http://forum.driveonwood.com/u/MikeR)
#### Post date: [September 10, 2016, 2:46pm UTC](http://forum.driveonwood.com/t/gilmore-style/899/971 "2016-09-10T14:46:30Z")
Your bamboo charcoal has a high yield. It does not shrink much! That surprises me starting with material that has not had a long drying time! 🌲
---
### Author:  [@MikeR](http://forum.driveonwood.com/u/MikeR)
#### Post date: [September 10, 2016, 2:50pm UTC](http://forum.driveonwood.com/t/gilmore-style/899/972 "2016-09-10T14:50:14Z")
Now you will get side-tracked making nice pottery! 😀
---
### Author:  [@robin](http://forum.driveonwood.com/u/robin)
#### Post date: [September 10, 2016, 6:46pm UTC](http://forum.driveonwood.com/t/gilmore-style/899/973 "2016-09-10T18:46:30Z")
Like home-made ceramic nozzles?
---
### Author:  [@k\_vanlooken](http://forum.driveonwood.com/u/k_vanlooken)
#### Post date: [September 11, 2016, 6:11am UTC](http://forum.driveonwood.com/t/gilmore-style/899/974 "2016-09-11T06:11:20Z")
Now… thats a good idea… 😁
My side tracks so far, with this oven:
1: MOU with Governmental Pharmacy Organisation, GPO in short, to make medical Activated Carbon from Bamboo
2: MOU with Rajabath University Lampang, to make a replacement fuel with syngas for the ceramic industry
3: MOU with Rajabath University to set up a “teaching program for gasification”
4: Making syngas with this oven, at the same time as making activated carbon.
5: Making Methanol from this syngas.
6: Testing and analyzing different carbon materials.
---
### Author:  [@k\_vanlooken](http://forum.driveonwood.com/u/k_vanlooken)
#### Post date: [October 14, 2016, 5:31am UTC](http://forum.driveonwood.com/t/gilmore-style/899/975 "2016-10-14T05:31:09Z")
opening the door of hell …
This is the color off 1000° C
[ ](https://www.youtube.com/watch?v=3u9N5sfbymg)
[ ](https://www.youtube.com/watch?v=_0LDH9ItQhM)
---
### Author:  [@k\_vanlooken](http://forum.driveonwood.com/u/k_vanlooken)
#### Post date: [October 14, 2016, 1:53pm UTC](http://forum.driveonwood.com/t/gilmore-style/899/976 "2016-10-14T13:53:23Z")
our work and Gasifiers on National Broadcasting…
My part starts at 18.30 minutes…
> **[ที่นี่บ้านเรา - พลังงานลำไผ่](https://program.thaipbs.or.th/Banrao/episodes/41170)**
>
> เมื่อไม้ไผ่เป็นมากกว่าตะเกียบ และไม้เสียบลูกชิ้น เรื่องราวจะเป็นอย่างไร ติดตามในที่นี่บ้านเรา ตอน พลังงานลำไผ่ วันพุธที่ 12 ตุลาคม 2559 เวลา 13.30 น. ทางไทยพีบีเอส รับชมทีวีออนไลน์ทาง www.thaipbs.or.th/Live
---
### Author:  [@TomC](http://forum.driveonwood.com/u/TomC)
#### Post date: [October 14, 2016, 7:14pm UTC](http://forum.driveonwood.com/t/gilmore-style/899/977 "2016-10-14T19:14:16Z")
Very well presented. I couldn’t help but notice, you spoke to your wife in one language and she spoke to the camera in another. What language do you use when talking with your wife? Tomc
---
### Author:  [@k\_vanlooken](http://forum.driveonwood.com/u/k_vanlooken)
#### Post date: [October 15, 2016, 5:23am UTC](http://forum.driveonwood.com/t/gilmore-style/899/978 "2016-10-15T05:23:19Z")
Hi Tom,
My wife and i communicate in German language, using also some Thai words, she translate all to Thai…
For most people in Thailand this is confusing because they always tend to expect English …
Fun all the way…
---
### Author:  [@Bobmac](http://forum.driveonwood.com/u/Bobmac)
#### Post date: [October 15, 2016, 5:48am UTC](http://forum.driveonwood.com/t/gilmore-style/899/979 "2016-10-15T05:48:42Z")
I thought you were French, I hope I didn’t offended you. Glad to know you are German. My great grand parents and grand mother were German. We are not stubborn, We are determined. Lol I can still hear it and they have been gone for many years now. Thank you for your determination. You are making a difference for your people there.
Bob
---
### Author:  [@k\_vanlooken](http://forum.driveonwood.com/u/k_vanlooken)
#### Post date: [October 15, 2016, 6:12am UTC](http://forum.driveonwood.com/t/gilmore-style/899/980 "2016-10-15T06:12:04Z")
Hi Bob,
Actually, i am Belgium, flemish…
But i do speak, read and write our 4 basic languages:
1: Netherlands/dutch/flemish (Native)
2: German
3: French
those 3 are our National languages
and 4: Englisch / International
Rest which are at very basic level: Italian, Spanish, Greek, Polish, Hungarian, Thai, Laotian and some Latin
[Previous page](http://forum.driveonwood.com/t/gilmore-style/899.md?page=48)
[Next page](http://forum.driveonwood.com/t/gilmore-style/899.md?page=50)