# Johan’s rebak chunker **URL:** http://forum.driveonwood.com/t/johan-s-rebak-chunker/7420 **Category:** Wood Chunkers **Created:** [July 18, 2023, 5:04pm UTC](http://forum.driveonwood.com/t/johan-s-rebak-chunker/7420 "2023-07-18T17:04:25Z") **Posts on this page:** 1 **Showing post:** 171
### Author: ![tcholton717](https://avatars.discourse-cdn.com/v2/letter/t/b9e5f3/32.png) [@tcholton717](http://forum.driveonwood.com/u/tcholton717) #### Post date: [August 28, 2023, 9:57pm UTC](http://forum.driveonwood.com/t/johan-s-rebak-chunker/7420/171 "2023-08-28T21:57:29Z")
How many pounds of wood do you use on your commute JO? Never really worked out any data for how much I could actually dry in this thing because I went to the dark side, but I know it will dry at least a hundred pound of chunks in about two hours. Probably more. Wasn’t hard to build. Rocket stove to heat it doesn’t use much fuel. > [@Wood dryer build](http://forum.driveonwood.com/t/wood-dryer-build/5361): > > This is the wood dryer I just built. Pretty simple. Helps if you have an old Weber Grill. Started out building a rocket stove out of 3 inch pipe and channel iron. My experience with Rocket Mass Heaters says that the cross sectional area needs to be pretty much the same throughout. I don’t think that applies to rocket stoves but I built it that way anyway. The fuel feed and heat riser are 3 inch ID pipe. The burn tunnel is a piece of 5 inch channel on the bottom capped with a … --- _[View the full topic](http://forum.driveonwood.com/t/johan-s-rebak-chunker/7420)._