# New Project-Firetubes available **URL:** http://forum.driveonwood.com/t/new-project-firetubes-available/834 **Category:** For Sale **Created:** [June 3, 2013, 11:23pm UTC](http://forum.driveonwood.com/t/new-project-firetubes-available/834 "2013-06-03T23:23:43Z") **Posts on this page:** 11 **Page:** 1
### Author: ![enoch4444](https://avatars.discourse-cdn.com/v2/letter/e/a88e57/32.png) [@enoch4444](http://forum.driveonwood.com/u/enoch4444) #### Post date: [June 3, 2013, 11:23pm UTC](http://forum.driveonwood.com/t/new-project-firetubes-available/834/1 "2013-06-03T23:23:43Z")
I finally got my hands on some firetube pipe. I had to buy a minimum size piece of 10’ 4". I’m keeping two 18" and a 22". With the ovaled part I had to cut off, I have (3) 18" pieces for sale if anyone needs firetube. This is 12-3/4" OD with 1/4" wall. 18" weighs about 50 pounds. It can be shipped UPS or FedEx by just putting a sticker on it I believe. An 18" firetube is $50.00 plus shipping or can be picked up if you’re close to Fulton,IL 61252. As a special deal (while the tubes last) I will trade one tube for enough 1-1/4" heavy banding (15" long pieces) to do one firetube. TJ ![](https://dow.nyc3.cdn.digitaloceanspaces.com/original/1X/e82e65f8b3a6ad4bd531507ead121ef75c623b40.jpg) ![](https://dow.nyc3.cdn.digitaloceanspaces.com/original/1X/e6e6c9c1102c0086f38b83a11bf746c6cfece9b8.jpg) ---
### Author: ![Chris](http://forum.driveonwood.com/user_avatar/forum.driveonwood.com/chris/32/56161_2.png) [@Chris](http://forum.driveonwood.com/u/Chris) #### Post date: [June 3, 2013, 11:28pm UTC](http://forum.driveonwood.com/t/new-project-firetubes-available/834/2 "2013-06-03T23:28:08Z")
Good deal! No more excuses fellas… get a tube and get welding. ---
### Author: ![josephhauler](http://forum.driveonwood.com/user_avatar/forum.driveonwood.com/josephhauler/32/12411_2.png) [@josephhauler](http://forum.driveonwood.com/u/josephhauler) #### Post date: [September 13, 2014, 11:31pm UTC](http://forum.driveonwood.com/t/new-project-firetubes-available/834/3 "2014-09-13T23:31:17Z")
I would be interested in one of these if you still have one avail. Thanks, Joseph H. Michigan ---
### Author: ![don\_mannes](http://forum.driveonwood.com/user_avatar/forum.driveonwood.com/don_mannes/32/19008_2.png) [@don\_mannes](http://forum.driveonwood.com/u/don_mannes) #### Post date: [September 14, 2014, 1:46am UTC](http://forum.driveonwood.com/t/new-project-firetubes-available/834/4 "2014-09-14T01:46:53Z")
Good Joseph! Another Michigander. Welcome to the discussions. Looking forward to maybe meeting you sometime. ---
### Author: ![drost2you2](http://forum.driveonwood.com/user_avatar/forum.driveonwood.com/drost2you2/32/11834_2.png) [@drost2you2](http://forum.driveonwood.com/u/drost2you2) #### Post date: [September 14, 2014, 1:49am UTC](http://forum.driveonwood.com/t/new-project-firetubes-available/834/5 "2014-09-14T01:49:35Z")
Imagine the size of the parade over here !!! ---
### Author: ![josephhauler](http://forum.driveonwood.com/user_avatar/forum.driveonwood.com/josephhauler/32/12411_2.png) [@josephhauler](http://forum.driveonwood.com/u/josephhauler) #### Post date: [September 14, 2014, 9:39am UTC](http://forum.driveonwood.com/t/new-project-firetubes-available/834/6 "2014-09-14T09:39:15Z")
Aye, likewise Don, I have watched your build closely. Thanks for the welcome. Not sure if Terry still has these firetubes or not but if you do I will get you as much cut to size (15 inch) banding you want, however the kind I get is 3/4 inch wide. -J/H ---
### Author: ![Gods1pilot](http://forum.driveonwood.com/user_avatar/forum.driveonwood.com/gods1pilot/32/21514_2.png) [@Gods1pilot](http://forum.driveonwood.com/u/Gods1pilot) #### Post date: [May 14, 2015, 3:58am UTC](http://forum.driveonwood.com/t/new-project-firetubes-available/834/7 "2015-05-14T03:58:37Z")
Still have a fire tube? ---
### Author: ![enoch4444](https://avatars.discourse-cdn.com/v2/letter/e/a88e57/32.png) [@enoch4444](http://forum.driveonwood.com/u/enoch4444) #### Post date: [May 15, 2015, 12:31am UTC](http://forum.driveonwood.com/t/new-project-firetubes-available/834/8 "2015-05-15T00:31:50Z")
yes, I still have firetube. I found a good source for the banding I need, so I’m good there. If anyone needs firetube I have a couple left. you can email me at: [enoch4444@yahoo.com](mailto:enoch4444@yahoo.com). TJ ---
### Author: ![MikeyB](https://avatars.discourse-cdn.com/v2/letter/m/edb3f5/32.png) [@MikeyB](http://forum.driveonwood.com/u/MikeyB) #### Post date: [May 15, 2015, 2:04am UTC](http://forum.driveonwood.com/t/new-project-firetubes-available/834/9 "2015-05-15T02:04:19Z")
For anyone looking for 1 1/4" banding. The area lumber yards around here throw that stuff in a big bin because it is unruly to handle. They give you all you want. Might be worth a call to your local lumber yard. ---
### Author: ![Gods1pilot](http://forum.driveonwood.com/user_avatar/forum.driveonwood.com/gods1pilot/32/21514_2.png) [@Gods1pilot](http://forum.driveonwood.com/u/Gods1pilot) #### Post date: [May 16, 2015, 12:28pm UTC](http://forum.driveonwood.com/t/new-project-firetubes-available/834/10 "2015-05-16T12:28:08Z")
Disregard TJ, found a tube. 😄 ---
### Author: ![debit.servus](https://avatars.discourse-cdn.com/v2/letter/d/ee7513/32.png) [@debit.servus](http://forum.driveonwood.com/u/debit.servus) #### Post date: [January 10, 2016, 11:13pm UTC](http://forum.driveonwood.com/t/new-project-firetubes-available/834/11 "2016-01-10T23:13:25Z")
I know the last reply is nearly 7 months old. OP, do you still have firetube available? Looking to buy a 22" firetube.