# New Project
**URL:** http://forum.driveonwood.com/t/new-project/475
**Category:** Projects
**Created:** [September 13, 2012, 3:27pm UTC](http://forum.driveonwood.com/t/new-project/475 "2012-09-13T15:27:16Z")
**Posts on this page:** 20
**Page:** 2
### Author:  [@Dustin](http://forum.driveonwood.com/u/Dustin)
#### Post date: [October 12, 2012, 1:50pm UTC](http://forum.driveonwood.com/t/new-project/475/21 "2012-10-12T13:50:58Z")
Since you started this thread I’ve been looking into the “Stephen Victoria” gasifier, looks very interesting. Very sparse information on it though but I did get a few pictures off yahoo woodgas. Hoping it’s ok to post them here as well, might help others (including myself) understand the layout of this design.
---
### Author:  [@tritowns](http://forum.driveonwood.com/u/tritowns)
#### Post date: [October 12, 2012, 3:19pm UTC](http://forum.driveonwood.com/t/new-project/475/22 "2012-10-12T15:19:32Z")
No worries at all… my current project is a little bigger than that of the picture. I’m running with a 4" restriction. the second top outter ring is 6" abd should act as a tar fence of sorts.
---
### Author:  [@Troy\_Martz](http://forum.driveonwood.com/u/Troy_Martz)
#### Post date: [October 22, 2012, 2:41am UTC](http://forum.driveonwood.com/t/new-project/475/23 "2012-10-22T02:41:21Z")
Hi Arvid, any updates? Thanks!
---
### Author:  [@tritowns](http://forum.driveonwood.com/u/tritowns)
#### Post date: [October 22, 2012, 2:24pm UTC](http://forum.driveonwood.com/t/new-project/475/24 "2012-10-22T14:24:50Z")
gotta get some materials for the ash can, and hopper flanges… i’ll get more pics up as soon as i get the materials cut and welded together.
---
### Author:  [@tritowns](http://forum.driveonwood.com/u/tritowns)
#### Post date: [November 5, 2012, 2:58pm UTC](http://forum.driveonwood.com/t/new-project/475/25 "2012-11-05T14:58:42Z")
re tasking some parts from an ivinger gasifer… at least this one should work
---
### Author:  [@Terry\_Lavictoire](http://forum.driveonwood.com/u/Terry_Lavictoire)
#### Post date: [November 5, 2012, 4:05pm UTC](http://forum.driveonwood.com/t/new-project/475/26 "2012-11-05T16:05:39Z")
Good stuff Maynard!
Git er Done!
T
---
### Author:  [@tritowns](http://forum.driveonwood.com/u/tritowns)
#### Post date: [November 7, 2012, 5:08pm UTC](http://forum.driveonwood.com/t/new-project/475/27 "2012-11-07T17:08:14Z")
slowly but surely.. sectioned the bottom part of the barrel i’ll be using as an ash can. and welded the what was the lid to the reactor.
hopefully i’ll be able to get some form of a hopper on this so i can atleast start to flare it in the very near future.
you can see the difference from the previous pic… that and i rotated the gas out 90 degrees to the clean out port.
---
### Author:  [@tritowns](http://forum.driveonwood.com/u/tritowns)
#### Post date: [November 7, 2012, 8:42pm UTC](http://forum.driveonwood.com/t/new-project/475/28 "2012-11-07T20:42:58Z")
welded… more or less.. i’ll water test it tomorrow if i can find some silicone
---
### Author:  [@Curt1](http://forum.driveonwood.com/u/Curt1)
#### Post date: [August 16, 2016, 4:27am UTC](http://forum.driveonwood.com/t/new-project/475/29 "2016-08-16T04:27:04Z")
Arvid, I this your unit that runs chips.
---
### Author:  [@tritowns](http://forum.driveonwood.com/u/tritowns)
#### Post date: [August 16, 2016, 8:50am UTC](http://forum.driveonwood.com/t/new-project/475/30 "2016-08-16T08:50:37Z")
To be honest… i never got that one finished… I still have it though.
---
### Author:  [@tritowns](http://forum.driveonwood.com/u/tritowns)
#### Post date: [August 16, 2016, 10:38am UTC](http://forum.driveonwood.com/t/new-project/475/31 "2016-08-16T10:38:26Z")
---
### Author:  [@tritowns](http://forum.driveonwood.com/u/tritowns)
#### Post date: [August 16, 2016, 10:38am UTC](http://forum.driveonwood.com/t/new-project/475/32 "2016-08-16T10:38:47Z")
---
### Author:  [@tritowns](http://forum.driveonwood.com/u/tritowns)
#### Post date: [August 16, 2016, 10:39am UTC](http://forum.driveonwood.com/t/new-project/475/33 "2016-08-16T10:39:13Z")
---
### Author:  [@tritowns](http://forum.driveonwood.com/u/tritowns)
#### Post date: [August 16, 2016, 10:40am UTC](http://forum.driveonwood.com/t/new-project/475/34 "2016-08-16T10:40:07Z")
This is the direction my units took…
---
### Author:  [@kmrland](http://forum.driveonwood.com/u/kmrland)
#### Post date: [August 18, 2016, 3:59am UTC](http://forum.driveonwood.com/t/new-project/475/35 "2016-08-18T03:59:08Z")
Hello Arvid i made my hopper door about like yours, just wondered if there is a set size spring too hold the lid shut on flash or puff backs , or what usualy happens with a hard puff back.Are you selling any of them trailer gasifier.?
---
### Author:  [@tritowns](http://forum.driveonwood.com/u/tritowns)
#### Post date: [August 18, 2016, 9:37am UTC](http://forum.driveonwood.com/t/new-project/475/36 "2016-08-18T09:37:34Z")
I use an electric fence handle… has a spring in it… I don’t put tons of pressure on it as my seal works well. Very hard to open with an engine running an putting vacuum on it.
The one in the picture went to Yellowknife… don’t sell as many as I’d like to.
---
### Author:  [@kmrland](http://forum.driveonwood.com/u/kmrland)
#### Post date: [August 18, 2016, 12:44pm UTC](http://forum.driveonwood.com/t/new-project/475/37 "2016-08-18T12:44:05Z")
Havent sold as many as i would have liked too. I am sure this has been the worst year in washer and dryer sales , since 2008, eaverything is boom, acording too the main stream media.a lot like just before the 2008 stock market crash, hope it aint so this time around the election cycle.
---
### Author:  [@don\_mannes](http://forum.driveonwood.com/u/don_mannes)
#### Post date: [August 18, 2016, 1:14pm UTC](http://forum.driveonwood.com/t/new-project/475/38 "2016-08-18T13:14:47Z")
> [@Terry\_Lavictoire](#):
>
> Food or fittings, that’s the question. 😄
Suck it in and git-er done 😏
---
### Author:  [@tritowns](http://forum.driveonwood.com/u/tritowns)
#### Post date: [August 18, 2016, 2:06pm UTC](http://forum.driveonwood.com/t/new-project/475/39 "2016-08-18T14:06:29Z")
As this is a very old post I do believe he did Don… just sayin
---
### Author:  [@tritowns](http://forum.driveonwood.com/u/tritowns)
#### Post date: [August 18, 2016, 2:08pm UTC](http://forum.driveonwood.com/t/new-project/475/40 "2016-08-18T14:08:36Z")
Original post is 2012…
I do have this unit though and will at some point probably finish it. Though I think my latest system design will do better.
[Previous page](http://forum.driveonwood.com/t/new-project/475.md?page=1)
[Next page](http://forum.driveonwood.com/t/new-project/475.md?page=3)