# Small engine mobile fuel station

**URL:** http://forum.driveonwood.com/t/small-engine-mobile-fuel-station/6368
**Category:** Charcoal Gasification
**Created:** [February 21, 2022, 6:28am UTC](http://forum.driveonwood.com/t/small-engine-mobile-fuel-station/6368 "2022-02-21T06:28:00Z")
**Posts on this page:** 1
**Showing post:** 29

<div class="post-metadata">

### Author: ![ForbiddenTuna](http://forum.driveonwood.com/user_avatar/forum.driveonwood.com/forbiddentuna/32/36469_2.png) [@ForbiddenTuna](http://forum.driveonwood.com/u/ForbiddenTuna)
#### Post date: [March 30, 2022, 11:44pm UTC](http://forum.driveonwood.com/t/small-engine-mobile-fuel-station/6368/29 "2022-03-30T23:44:48Z")

</div>

Sure, I’ll go find it and edit it into this comment. Have you seen Matt’s video on his ammo box gasifier?

[![](https://img.youtube.com/vi/5Er-4T9H-GM/maxresdefault.jpg "Ammo Box No Weld Gasifier Build Tutorial Segment 1") ](https://www.youtube.com/watch?v=5Er-4T9H-GM)

[![](https://img.youtube.com/vi/vgAyYl_AATk/maxresdefault.jpg "Ammo Box No Weld Gasifier Build Tutorial Segment 2") ](https://www.youtube.com/watch?v=vgAyYl_AATk)

[![](https://img.youtube.com/vi/VQv7DkMiH-A/maxresdefault.jpg "Ammo Box No Weld Gasifier Build Tutorial Segment 3") ](https://www.youtube.com/watch?v=VQv7DkMiH-A)

Matt found a better way to make his nozzles without needing to cut threads on the nozzle pipe.

He uses the 1" couple and puts in a 1" to 3/4" reducer bushing. He then takes a 3/4" pipe and cuts slits in the end so it fits a 1/2" pipe easily. When you thread the 3/4" pipe into the coupler it bites down on the 1/2" pipe to hold it down. This way you can swap them out quickly and take the whole nozzle assembly out without needing to dive into the barrel. Removes from outside.

---

_[View the full topic](http://forum.driveonwood.com/t/small-engine-mobile-fuel-station/6368)._