# Chunker questains

**URL:** http://forum.driveonwood.com/t/chunker-questains/1418
**Category:** Wood Chunkers
**Created:** [February 26, 2015, 5:17pm UTC](http://forum.driveonwood.com/t/chunker-questains/1418 "2015-02-26T17:17:58Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![kmrland](http://forum.driveonwood.com/user_avatar/forum.driveonwood.com/kmrland/32/27959_2.png) [@kmrland](http://forum.driveonwood.com/u/kmrland)
#### Post date: [February 26, 2015, 5:17pm UTC](http://forum.driveonwood.com/t/chunker-questains/1418/1 "2015-02-26T17:17:58Z")

</div>

I HAVE A 1& 1/2 TON REAR AXEL STICK ,350 GEAR RATIO,HAS THIS SIZE BEEN USED AS CHUNKER AND OR HOW WELL WOULD IT LIKELY HOLD UP.

---

<div class="post-metadata">

### Author: ![Wayne](http://forum.driveonwood.com/user_avatar/forum.driveonwood.com/wayne/32/9839_2.png) [@Wayne](http://forum.driveonwood.com/u/Wayne)
#### Post date: [February 26, 2015, 9:48pm UTC](http://forum.driveonwood.com/t/chunker-questains/1418/2 "2015-02-26T21:48:33Z")

</div>

Hello Kevin .

I guess the above would depend on how big of chunks you wanted to chunk.

My chunker has about a 2 inch diameter axle and the pinion to ring gear ratio is about a 6 to 1 .

---

<div class="post-metadata">

### Author: ![kmrland](http://forum.driveonwood.com/user_avatar/forum.driveonwood.com/kmrland/32/27959_2.png) [@kmrland](http://forum.driveonwood.com/u/kmrland)
#### Post date: [June 26, 2023, 12:58am UTC](http://forum.driveonwood.com/t/chunker-questains/1418/3 "2023-06-26T00:58:35Z")

</div>

Questain deleted by auther.