# Cody's Hopefully Raw Wood Reactor

**URL:** http://forum.driveonwood.com/t/codys-hopefully-raw-wood-reactor/5931
**Category:** Projects
**Created:** [July 15, 2021, 12:30am UTC](http://forum.driveonwood.com/t/codys-hopefully-raw-wood-reactor/5931 "2021-07-15T00:30:37Z")
**Posts on this page:** 1
**Showing post:** 123

<div class="post-metadata">

### Author: ![Tone](https://avatars.discourse-cdn.com/v2/letter/t/71c47a/32.png) [@Tone](http://forum.driveonwood.com/u/Tone)
#### Post date: [January 6, 2022, 7:57am UTC](http://forum.driveonwood.com/t/codys-hopefully-raw-wood-reactor/5931/123 "2022-01-06T07:57:44Z")

</div>

Cody, I’ve philosophized here about mixing steam / pyrolysis gases with fresh air,

> [@Properties of a good wood gasifier](http://forum.driveonwood.com/t/properties-of-a-good-wood-gasifier/5240/210):
>
> Sketch for rearrangement in the gasifier. I will definitely try this, but not right away, it will work as it is first to take longer measurements.

> [@Škoda pickup on wood](http://forum.driveonwood.com/t/skoda-pickup-on-wood/5117/299):
>
> Kristjan, I’ve been thinking a bit about mixing water vapor in your system, you use moist charcoal but the drying takes place over the hot zone and the humidity rises up in the center of the action and only dry air is blown in. Your gasifier has air intake through the pipe from the top, if you added an opening for steam entry on the inside it could improve the gas. thinkinggrinning

---

_[View the full topic](http://forum.driveonwood.com/t/codys-hopefully-raw-wood-reactor/5931)._