# JO´s 8" gasifier

**URL:** http://forum.driveonwood.com/t/jo-s-8-gasifier/1928
**Category:** Projects
**Created:** [August 16, 2015, 6:47pm UTC](http://forum.driveonwood.com/t/jo-s-8-gasifier/1928 "2015-08-16T18:47:41Z")
**Posts on this page:** 1
**Showing post:** 104

<div class="post-metadata">

### Author: ![TomC](http://forum.driveonwood.com/user_avatar/forum.driveonwood.com/tomc/32/11384_2.png) [@TomC](http://forum.driveonwood.com/u/TomC)
#### Post date: [April 29, 2016, 3:39pm UTC](http://forum.driveonwood.com/t/jo-s-8-gasifier/1928/104 "2016-04-29T15:39:30Z")

</div>

JO How about drilling the guide hole then remove the drill bit and put in an old bit holding on to the cutting part and a smooth part going into the predrilled hole. Or take out the bit and put a piece of plain rod cut to length in the hole saw. Save those specialty bits. I don’t know, you may have all the holes already cut.TomC

---

_[View the full topic](http://forum.driveonwood.com/t/jo-s-8-gasifier/1928)._