# My first small engine run **URL:** http://forum.driveonwood.com/t/my-first-small-engine-run/344 **Category:** Small Engines **Created:** [June 17, 2012, 9:51am UTC](http://forum.driveonwood.com/t/my-first-small-engine-run/344 "2012-06-17T09:51:17Z") **Posts on this page:** 1 **Showing post:** 228
### Author: ![pepe2000](http://forum.driveonwood.com/user_avatar/forum.driveonwood.com/pepe2000/32/11309_2.png) [@pepe2000](http://forum.driveonwood.com/u/pepe2000) #### Post date: [June 14, 2014, 1:38am UTC](http://forum.driveonwood.com/t/my-first-small-engine-run/344/228 "2014-06-14T01:38:00Z")
I finally put most of the finishing touches on my filter. The first pic is the gas inlet. The second pic is the support grate for my filter medium, pine needles. The third pic shows it installed with 1/2" galv hardware cloth over the holes. The next 4 pics show the loading and baffle placement. Hopefully these baffles deflect and direct the gas through most of the medium versus a no baffle straight route basically up the center. The last pic is the filter exhaust and line shutoff. Pepe ![](https://dow.nyc3.cdn.digitaloceanspaces.com/original/2X/7/7dc852e8b06ec85e6a592848a49adee0b0e34c10.JPG) ![](https://dow.nyc3.cdn.digitaloceanspaces.com/original/2X/1/1004c245ac0e65f1ea0bef4843d8d966c95820b1.JPG) ![](https://dow.nyc3.cdn.digitaloceanspaces.com/original/2X/6/6024e73dd56118821e474e9675c0e9849a54894b.JPG) ![](https://dow.nyc3.cdn.digitaloceanspaces.com/original/2X/a/a12bb8d9a7b82df5d157d20fa950c971467ea975.JPG) ![](https://dow.nyc3.cdn.digitaloceanspaces.com/original/2X/0/054f7b6ca3f77d283e6e0bc308af80c54a243cf5.JPG) ![](https://dow.nyc3.cdn.digitaloceanspaces.com/original/2X/c/cd11738c4ac7917419f644749865b78eef1eca20.JPG) ![](https://dow.nyc3.cdn.digitaloceanspaces.com/original/2X/f/fea987d4cf97bf7dcbdf6c1a62904775eb2b3bd9.JPG) ![](https://dow.nyc3.cdn.digitaloceanspaces.com/original/2X/7/7eb36bc5b8fad291e320ba20273ef97d7b21122e.JPG) --- _[View the full topic](http://forum.driveonwood.com/t/my-first-small-engine-run/344)._