# My first small engine run

**URL:** http://forum.driveonwood.com/t/my-first-small-engine-run/344
**Category:** Small Engines
**Created:** [June 17, 2012, 9:51am UTC](http://forum.driveonwood.com/t/my-first-small-engine-run/344 "2012-06-17T09:51:17Z")
**Posts on this page:** 1
**Showing post:** 330

<div class="post-metadata">

### Author: ![pepe2000](http://forum.driveonwood.com/user_avatar/forum.driveonwood.com/pepe2000/32/11309_2.png) [@pepe2000](http://forum.driveonwood.com/u/pepe2000)
#### Post date: [February 4, 2015, 4:09am UTC](http://forum.driveonwood.com/t/my-first-small-engine-run/344/330 "2015-02-04T04:09:10Z")

</div>

Hello gasifier enthusiasts,  
I continue with the dismantle. Hopefully this will give some of our newer members a clearer picture of how  
my gasifier goes together. I removed the lid. Then I removed the monorator hopper clean outs and the gaskets look OK, I’ll reuse them. Some debris in the moat is shown. It’s relatively easy to reach for cleaning when necessary. Then I wiggled the gasifier over and centered the hopper exactly under the trolley. Next I’ll run my chains up to a lifting ring under the trolley, rig the pulleys, pull it apart and roll it over and set it on the work table. The work table is a comfortable height for welding on the cooling tubes.  
Can’t wait to get started on them.  
Pepe

 ![](https://dow.nyc3.cdn.digitaloceanspaces.com/original/2X/7/785776ba6f56efeef18dd8be23c24efa504f7fc9.jpg)  
 ![](https://dow.nyc3.cdn.digitaloceanspaces.com/original/2X/a/a8e7a6e86c716fffbf14c57f96a0805a32caa2df.jpg)  
 ![](https://dow.nyc3.cdn.digitaloceanspaces.com/original/2X/1/113c2ca42035c27260313573294f89398b8e66cb.jpg)  
 ![](https://dow.nyc3.cdn.digitaloceanspaces.com/original/2X/2/2341f07381bfa7653031679e26f615f37fc53802.jpg)

---

_[View the full topic](http://forum.driveonwood.com/t/my-first-small-engine-run/344)._