# Nozzles for Charcoal gasifiers, part 2 **URL:** http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers-part-2/3639 **Category:** Charcoal Gasification **Created:** [December 18, 2017, 3:11pm UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers-part-2/3639 "2017-12-18T15:11:57Z") **Posts on this page:** 1 **Showing post:** 506
### Author: ![Bumpa](http://forum.driveonwood.com/user_avatar/forum.driveonwood.com/bumpa/32/39379_2.png) [@Bumpa](http://forum.driveonwood.com/u/Bumpa) #### Post date: [January 29, 2023, 12:52am UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers-part-2/3639/506 "2023-01-29T00:52:57Z")
> [@kmrland](#): > > are there any good books for building charco gasifiers- updated tested designs for small cars. I would like too buy a GOOD charco gasifier building BOOK, NO VIDIO needed too get the full picture. Kevin, you sound like me 6 months ago. The best info I could find was this thread: > [@Drawings of charcoal gasifiers for vehicles](https://forum.driveonwood.com/t/drawings-of-charcoal-gasifiers-for-vehicles/3892): > > Hi everybody: It is said that one drawing worth more than thousand words, plus is can be read in almost every languaje. So here I am posting a colection of the drawings that I have placed on each topic. Most of this drawings have being checked with the builders. Some may include spec’s sheet, part list and/or operation procedures. Please keep in mind that each drawing has a date. Improvementes/modification may be made after that date. Everybody are welcome to add any further drawings/sketch t… Lots of designs from guys here on the forum. I read and studied all of them because I really wanted to run on charcoal. In the end, I decided to build the bottom end of @Wayne’s gasifier as it is the only one proven for the long haul on a big v8 engine. I can then have the option of switching to wood if I want in the future by adding the hopper ect. If I was going to put a gasifier in a small car I would probably do something similar to what @KristijanL did in his Mercedes. Garry C --- _[View the full topic](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers-part-2/3639)._