# Nozzles for Charcoal gasifiers, part 2

**URL:** http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers-part-2/3639
**Category:** Charcoal Gasification
**Created:** [December 18, 2017, 3:11pm UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers-part-2/3639 "2017-12-18T15:11:57Z")
**Posts on this page:** 1
**Showing post:** 559

<div class="post-metadata">

### Author: ![Matt](http://forum.driveonwood.com/user_avatar/forum.driveonwood.com/matt/32/11298_2.png) [@Matt](http://forum.driveonwood.com/u/Matt)
#### Post date: [January 26, 2024, 10:15pm UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers-part-2/3639/559 "2024-01-26T22:15:30Z")

</div>

Ok I got some Pics!!

 ![IMG_20240126_134302555_PORTRAIT](https://dow.nyc3.cdn.digitaloceanspaces.com/original/3X/0/7/0787c60fa01cc467a26b84758f0235ba9d11582b.jpeg)

So here this is a 3/4 inch nipple with a 1/2 inch nipple inserted into the 3/4. When the 3/4 nipple is threaded into the 1 to 3/4 bushing it locks it in place as NPT is a tapered thread. You can cut slits into the end of the 3/4 nipple to help compress and bite down if needed.

 ![IMG_20240126_134557698_PORTRAIT](https://dow.nyc3.cdn.digitaloceanspaces.com/original/3X/e/3/e354cf892442f50263dac75b4efd1ab70db6c9b1.jpeg)  
 ![IMG_20240126_134656092_PORTRAIT](https://dow.nyc3.cdn.digitaloceanspaces.com/original/3X/1/6/1698813703c5cfb2a014c1faec32022a6a6a246b.jpeg)  
 ![IMG_20240126_134854371_PORTRAIT](https://dow.nyc3.cdn.digitaloceanspaces.com/original/3X/4/2/42d27ef7125a2168793bce3aed9100910e6a2d87.jpeg)

So here inside there is a step where the 1/2 inch nipple ( nozzle ) is inserted. So if the water drip is left on after a stall or shut down; it cant leak into the reactor. Orient one of the air intake holes in the cap down so it can drain out instead.

---

_[View the full topic](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers-part-2/3639)._