# Nozzles for Charcoal gasifier's
**URL:** http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers/2453
**Category:** Charcoal Gasification
**Created:** [April 30, 2016, 6:26am UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers/2453 "2016-04-30T06:26:19Z")
**Posts on this page:** 20
**Page:** 7
### Author:  [@k\_vanlooken](http://forum.driveonwood.com/u/k_vanlooken)
#### Post date: [June 16, 2016, 3:07am UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers/2453/121 "2016-06-16T03:07:46Z")
Some results from testing the cooking unit, the nozzle is not in direct contact with the charcoal it seems.
---
### Author:  [@KristijanL](http://forum.driveonwood.com/u/KristijanL)
#### Post date: [June 16, 2016, 5:49am UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers/2453/122 "2016-06-16T05:49:04Z")
I havent found any info on multiple nozzles before either. Strange as it is a simple solution to many problems. l started tthinking in that way when my crossdraft showed poor resaults ( exit temp to high) on my Seat. The generator was wide and low so multiple nozzles were the only solution.
---
### Author:  [@trigaux](http://forum.driveonwood.com/u/trigaux)
#### Post date: [June 16, 2016, 12:24pm UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers/2453/123 "2016-06-16T12:24:50Z")
I have built a nozzle of this type for my trarteur.
I ferrais pictures as soon as possible
Thierry
---
### Author:  [@BillSchiller](http://forum.driveonwood.com/u/BillSchiller)
#### Post date: [July 1, 2016, 12:19am UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers/2453/124 "2016-07-01T00:19:07Z")
I bought this stainless steel chicken deboner per Carl’s web search during the Friday Hangout.
The discussion was about adjustable nozzle for a charcoal gasifier. So maybe this with a setup similar to Don M’s drum rotor, believe one can fine tune their gas output or adjust it for a different engine.
The base is 3" wide and is 4" tall not including the nut welded on the bottom
---
### Author:  [@dbaillie](http://forum.driveonwood.com/u/dbaillie)
#### Post date: [July 1, 2016, 12:45am UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers/2453/125 "2016-07-01T00:45:50Z")
Hey Bill do you have a link and cost?
---
### Author:  [@BillSchiller](http://forum.driveonwood.com/u/BillSchiller)
#### Post date: [July 1, 2016, 12:56am UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers/2453/126 "2016-07-01T00:56:13Z")
Here you go.
It feels pretty sturdy, I have no time to build anything yet, but when I do, I think this is the ticket.
[http://www.ebay.com/itm/DMP-STAINLESS-STEEL-CHICKEN-DEBONING-CONE-XLNT-/151154394001](http://www.ebay.com/itm/DMP-STAINLESS-STEEL-CHICKEN-DEBONING-CONE-XLNT-/151154394001)?
---
### Author:  [@Carl](http://forum.driveonwood.com/u/Carl)
#### Post date: [July 1, 2016, 2:24am UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers/2453/127 "2016-07-01T02:24:31Z")
And until you “build”, you can de-bone any tasty chickens you might get.
---
### Author:  [@k\_vanlooken](http://forum.driveonwood.com/u/k_vanlooken)
#### Post date: [July 1, 2016, 6:43am UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers/2453/128 "2016-07-01T06:43:47Z")
I love this idea’s for adjustable nozzle’s…
And the builds of course…
A wonderfull find and great idea Bill…
---
### Author:  [@BillSchiller](http://forum.driveonwood.com/u/BillSchiller)
#### Post date: [July 1, 2016, 11:41am UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers/2453/129 "2016-07-01T11:41:56Z")
Thanks Koen but the idea and find was @Carl I’m just an impulse buyer. Hahaha
To me it made sense and for $20, it was low risk. I like the vertacle nozzle @don_mannes built, this may be a good addition to that.
---
### Author:  [@KristijanL](http://forum.driveonwood.com/u/KristijanL)
#### Post date: [July 1, 2016, 12:35pm UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers/2453/130 "2016-07-01T12:35:05Z")
Looks great for a gasifier but l cant realy imagine how to use it on a chickhen 😀 is this a part from a tool or is that cone a tool for deboneing?
---
### Author:  [@Carl](http://forum.driveonwood.com/u/Carl)
#### Post date: [July 1, 2016, 3:29pm UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers/2453/131 "2016-07-01T15:29:03Z")
Youtube to your assistance. This time of year, I’d rather have ice cream on a cone.
[ ](https://www.youtube.com/watch?v=m0uR7ASVOAw)
---
### Author:  [@Wayne](http://forum.driveonwood.com/u/Wayne)
#### Post date: [July 1, 2016, 3:34pm UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers/2453/132 "2016-07-01T15:34:47Z")
If you have ever watched a chicken catching machine , raise your hand 😂
---
### Author:  [@KristijanL](http://forum.driveonwood.com/u/KristijanL)
#### Post date: [July 1, 2016, 3:50pm UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers/2453/133 "2016-07-01T15:50:28Z")
Thanks for clearing that up Carl 😀
Well my chickhen catching machine is a .22 but not sure you ment that 😉
---
### Author:  [@smokeyjim](http://forum.driveonwood.com/u/smokeyjim)
#### Post date: [July 1, 2016, 8:37pm UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers/2453/134 "2016-07-01T20:37:36Z")
Had a bird dog once that was a chicken catching machine.😁
When I was young kid at home we had a rod with a hook on it. Just throw the chickens some feed and reach in and get the one you wonted by the leg. The hook was just wide enough to go over it leg but it foot would slide through.
---
### Author:  [@Wayne](http://forum.driveonwood.com/u/Wayne)
#### Post date: [July 1, 2016, 9:16pm UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers/2453/135 "2016-07-01T21:16:53Z")
I don’t want to hyjack Koen thread but I will share this .
We have a LOT of chicken farming in Alabama .
A local farmer said he used one of the fastest chicken catchers in the world . I made a trip to his place to see just how fast this guy was . Turned out not to be a guy but a machine 😁
Here is what it looked like .
[ ](https://www.youtube.com/watch?v=zqnp-cvKeqc)
---
### Author:  [@k\_vanlooken](http://forum.driveonwood.com/u/k_vanlooken)
#### Post date: [July 2, 2016, 1:08am UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers/2453/136 "2016-07-02T01:08:10Z")
chicken, hot glowing charcoal and a can of beer… life is wonderful 😁
---
### Author:  [@don\_mannes](http://forum.driveonwood.com/u/don_mannes)
#### Post date: [July 10, 2016, 5:23pm UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers/2453/137 "2016-07-10T17:23:28Z")
> [@k\_vanlooken](#):
>
> hicken, hot glowing charcoal and a can of beer… life is wonderful 😁
Sounds like a good way to celebrate your birthday today. Happy birthday!
---
### Author:  [@Bobmac](http://forum.driveonwood.com/u/Bobmac)
#### Post date: [July 10, 2016, 7:43pm UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers/2453/138 "2016-07-10T19:43:32Z")
Happy Birthday Koen. The older you get, the Better It Gets. At 64 years old I appreciate everything new Birthday that comes my way, looking forward to a lot more. Hope you see many more Birthdays too. Cheers. I heard on the “Dark Side” of Charcoal Gasification they have Cookies! Is this True? I hope so.
Bob
---
### Author:  [@Carl](http://forum.driveonwood.com/u/Carl)
#### Post date: [July 11, 2016, 2:16am UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers/2453/139 "2016-07-11T02:16:12Z")
Happy Birthday Koen. We enjoy your progress.
---
### Author:  [@Jeff](http://forum.driveonwood.com/u/Jeff)
#### Post date: [July 11, 2016, 2:32am UTC](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers/2453/140 "2016-07-11T02:32:38Z")
Yes, indeed Koen. Happy Birthday. 😌
[Previous page](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers/2453.md?page=6)
[Next page](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers/2453.md?page=8)