# Oxy / Atomizer Mixer Experiment **URL:** http://forum.driveonwood.com/t/oxy-atomizer-mixer-experiment/7921 **Category:** Charcoal Gasification **Created:** [July 10, 2024, 9:21pm UTC](http://forum.driveonwood.com/t/oxy-atomizer-mixer-experiment/7921 "2024-07-10T21:21:09Z") **Posts on this page:** 1 **Showing post:** 12
### Author: ![FruitvaleFarmer](https://avatars.discourse-cdn.com/v2/letter/f/e0b2c6/32.png) [@FruitvaleFarmer](http://forum.driveonwood.com/u/FruitvaleFarmer) #### Post date: [July 11, 2024, 5:02pm UTC](http://forum.driveonwood.com/t/oxy-atomizer-mixer-experiment/7921/12 "2024-07-11T17:02:31Z")
> [@Nozzles for Charcoal gasifiers, part 2](http://forum.driveonwood.com/t/nozzles-for-charcoal-gasifiers-part-2/3639/619): > > This has been a problem from the very beginning just trying to get it to drip through the tube into the nozzle. I’ll move some of the clutter over here from the “Nozzles” thread. If flow is the problem, how about a pressurized water feed? The flow depends on the pressure drop across the needle valve. If it’s gravity fed, changes in nozzle pressure and surface tension effects change the pressure significantly. With something like an insect sprayer, you could put 5 psi or so in the tank, and pressure changes at the valve would be much smaller, percentage-wise. This suggestion _doesn’t_ mean I’m not eager to see how the misters work. --- _[View the full topic](http://forum.driveonwood.com/t/oxy-atomizer-mixer-experiment/7921)._