# Saw mill gasifier
**URL:** http://forum.driveonwood.com/t/saw-mill-gasifier/7922
**Category:** General Discussion
**Created:** [July 12, 2024, 3:11pm UTC](http://forum.driveonwood.com/t/saw-mill-gasifier/7922 "2024-07-12T15:11:27Z")
**Posts on this page:** 6
**Page:** 2
### Author:  [@tcholton717](http://forum.driveonwood.com/u/tcholton717)
#### Post date: [July 28, 2024, 11:59pm UTC](http://forum.driveonwood.com/t/saw-mill-gasifier/7922/21 "2024-07-28T23:59:04Z")
420cc Harbor Freight preditor. I was trying to retain the factory air cleaner housing but now I see that’s probably not going to happen. I use a gate valve on my other WG engines because it provides the best incremental opening and closing but they are a little clunky and I was looking for a way around that.
[https://www.harborfreight.com/13-hp-420cc-ohv-horizontal-shaft-gas-engine-epa-60340.html?utm\_source=google&utm\_medium=cpc&utm\_campaign=12188110244&campaignid=12188110244&utm\_content=123857267944&adsetid=123857267944&product=60340&store=3370&gad\_source=1](https://www.harborfreight.com/13-hp-420cc-ohv-horizontal-shaft-gas-engine-epa-60340.html?utm_source=google&utm_medium=cpc&utm_campaign=12188110244&campaignid=12188110244&utm_content=123857267944&adsetid=123857267944&product=60340&store=3370&gad_source=1)
---
### Author:  [@tcholton717](http://forum.driveonwood.com/u/tcholton717)
#### Post date: [July 29, 2024, 10:28pm UTC](http://forum.driveonwood.com/t/saw-mill-gasifier/7922/22 "2024-07-29T22:28:14Z")
Cloudy day so I tried to get caught up in the garden because I don’t do direct sun. That was some hours at 85 per cent humdity and 82F and tropcal dew points so not a lot left in the tank when I got done. Did manage to get the plumbing for the gasifier worked out and installed. Ended up using a 1 inch gate valve and was able to keep the engine filter housing in place. Wanted to finish welding the two sections of the gasifier base back together but we got a short thunderstorm and I called it a day. Should finish tomorrow. Been over a year since I built anything like this. It was fun.
---
### Author:  [@tcholton717](http://forum.driveonwood.com/u/tcholton717)
#### Post date: [August 13, 2024, 2:39pm UTC](http://forum.driveonwood.com/t/saw-mill-gasifier/7922/23 "2024-08-13T14:39:07Z")
This has been on the back burner for a few weeks. Hopefully I can test it sometime this week. Don Mannes pointed out that the shop vac I’m using for a blower and filter housing uses a brushed motor. That means it makes sparks. I considered that the actual fan blades moving the wood gas would be pretty much isolated from the motor and thought about just going ahead and risking it. I’d throw a movers blanket over it and set up a remote on off switch a safe distance away because I didn’t want to have to do the rework to make a different filter/blower set up but then decided it would be foolish to risk blowing up a 60 dollar vac. I’ll have to see what I have as a substitute.
---
### Author:  [@Jan](http://forum.driveonwood.com/u/Jan)
#### Post date: [August 13, 2024, 5:09pm UTC](http://forum.driveonwood.com/t/saw-mill-gasifier/7922/24 "2024-08-13T17:09:46Z")
I probably have to talk about one thing I did Tom, I tried to suck crap out of the gas tank of the PV (volvo), it didn’t go so well, there was a lot of smoke around the vacuum cleaner, it looked very black and melted, it didn’t like the fumes from the gas tank.
---
### Author:  [@FruitvaleFarmer](http://forum.driveonwood.com/u/FruitvaleFarmer)
#### Post date: [August 13, 2024, 6:55pm UTC](http://forum.driveonwood.com/t/saw-mill-gasifier/7922/25 "2024-08-13T18:55:37Z")
Our local thrift store has an intermittent supply of air mattress blowers. If you’re patient, you can choose D-cell battery, rechargeable, 12-volt, 120-volt, manual piston and manual bellows.
As an aside, I’m suspicious that a lot of flare failures result from too strong a blower. My four-D-cell blower seems to work better with three batteries and a “jumper.” If the blower’s outlet is faster than the flame speed of your gas, good gas still won’t hold a flame.
I think.
Perhaps @smartguys could comment.
---
### Author:  [@tcholton717](http://forum.driveonwood.com/u/tcholton717)
#### Post date: [August 13, 2024, 9:01pm UTC](http://forum.driveonwood.com/t/saw-mill-gasifier/7922/26 "2024-08-13T21:01:33Z")
I’m just going pick up another bilge blower. Tried and true. I just thought I’d try something different.
[Previous page](http://forum.driveonwood.com/t/saw-mill-gasifier/7922.md?page=1)