# Small engine mobile fuel station **URL:** http://forum.driveonwood.com/t/small-engine-mobile-fuel-station/6368 **Category:** Charcoal Gasification **Created:** [February 21, 2022, 6:28am UTC](http://forum.driveonwood.com/t/small-engine-mobile-fuel-station/6368 "2022-02-21T06:28:00Z") **Posts on this page:** 1 **Showing post:** 72
### Author: ![ForbiddenTuna](http://forum.driveonwood.com/user_avatar/forum.driveonwood.com/forbiddentuna/32/36469_2.png) [@ForbiddenTuna](http://forum.driveonwood.com/u/ForbiddenTuna) #### Post date: [April 15, 2022, 4:03am UTC](http://forum.driveonwood.com/t/small-engine-mobile-fuel-station/6368/72 "2022-04-15T04:03:42Z")
Señor Ramos and Bruce made this TLUD. Sort of boosted with a blower for smaller sized feed stock. > [@Hi-Temp Carbonizer for bio-waste](http://forum.driveonwood.com/t/hi-temp-carbonizer-for-bio-waste/5213): > > TRASH CARBONIZER FOR GASIFIERS APPLIED TO CARS. Hi There: I am/was having big difference on the performance of my testing gasifier on my vehicle. One day I will drive at 110 Km/h (70 miles/hour) for 40 Km (25 miles), and next week will not work at all, beside causing a very dirty carburetor. I suspect that my problem is the way I was carbonizing my waste, I was using the two drums & rebars system So, I decided to improve my carbonizing. I dig into some literature and check the topic “Charcoal… I like this method because the air can only come in from one spot, and you can cap it off with a pipe. No more worrying about sand not sealing the TLUD well enough. --- _[View the full topic](http://forum.driveonwood.com/t/small-engine-mobile-fuel-station/6368)._