# Wayne's V-10 Ram
**URL:** http://forum.driveonwood.com/t/waynes-v-10-ram/1074
**Category:** Projects
**Created:** [March 5, 2012, 10:54am UTC](http://forum.driveonwood.com/t/waynes-v-10-ram/1074 "2012-03-05T10:54:15Z")
**Posts on this page:** 20
**Page:** 31
### Author:  [@whiteriverfishing](http://forum.driveonwood.com/u/whiteriverfishing)
#### Post date: [February 5, 2018, 10:02pm UTC](http://forum.driveonwood.com/t/waynes-v-10-ram/1074/605 "2018-02-05T22:02:19Z")
Wayne your blower switches you have in the bed of your truck are they water proof .
---
### Author:  [@Wayne](http://forum.driveonwood.com/u/Wayne)
#### Post date: [February 5, 2018, 11:55pm UTC](http://forum.driveonwood.com/t/waynes-v-10-ram/1074/606 "2018-02-05T23:55:13Z")
Hello Robert
The switches are not water proof and I have had to replaced a couple over the years . Not complaining because they where cheap.
---
### Author:  [@whiteriverfishing](http://forum.driveonwood.com/u/whiteriverfishing)
#### Post date: [February 6, 2018, 12:13am UTC](http://forum.driveonwood.com/t/waynes-v-10-ram/1074/607 "2018-02-06T00:13:21Z")
Ok thanks Wayne I will be ordering switches soon.
---
### Author:  [@Wayne](http://forum.driveonwood.com/u/Wayne)
#### Post date: [February 19, 2018, 9:44pm UTC](http://forum.driveonwood.com/t/waynes-v-10-ram/1074/608 "2018-02-19T21:44:48Z")
While out working the ole wood burner this afternoon it rolled over 32,000 miles on wood gas.
[ ](https://www.youtube.com/watch?v=fDO1CI_tdd4)
---
### Author:  [@Wayne](http://forum.driveonwood.com/u/Wayne)
#### Post date: [April 3, 2018, 11:54pm UTC](http://forum.driveonwood.com/t/waynes-v-10-ram/1074/609 "2018-04-03T23:54:05Z")
I worked the ole wood burner hard today with farming chores . Hard for me to believe I got as much work done with no gasoline .
Something wrong with my camera ( or operator ) , the videos shut down at one minute with out me realizing it . š„
[ ](https://www.youtube.com/watch?v=HVhZyFwChHQ)
[ ](https://www.youtube.com/watch?v=bZbs6CONzC0)
---
### Author:  [@paulstowing](http://forum.driveonwood.com/u/paulstowing)
#### Post date: [April 4, 2018, 12:17am UTC](http://forum.driveonwood.com/t/waynes-v-10-ram/1074/610 "2018-04-04T00:17:30Z")
truck still sounds good wayne I cant wait to see that sort of nice weather here.
---
### Author:  [@Wayne](http://forum.driveonwood.com/u/Wayne)
#### Post date: [April 14, 2018, 3:25pm UTC](http://forum.driveonwood.com/t/waynes-v-10-ram/1074/611 "2018-04-14T15:25:17Z")
The ole V-10 work truck has been at work and earning itās keep the last few days. I have been trying to thin out my junk pile a little .
[ ](https://www.youtube.com/watch?v=O1gpuqcpyV8)
[ ](https://www.youtube.com/watch?v=NQtuxPLqPWY)
[ ](https://www.youtube.com/watch?v=XbpF153zAqg)
   
---
### Author:  [@MikeR](http://forum.driveonwood.com/u/MikeR)
#### Post date: [April 14, 2018, 4:50pm UTC](http://forum.driveonwood.com/t/waynes-v-10-ram/1074/612 "2018-04-14T16:50:23Z")
Mixed feelings. I am glad you are able to put the past behind and look to a bright future. Plus a little cash in the pocket helps. š
---
### Author:  [@JO\_Olsson](http://forum.driveonwood.com/u/JO_Olsson)
#### Post date: [April 14, 2018, 4:56pm UTC](http://forum.driveonwood.com/t/waynes-v-10-ram/1074/613 "2018-04-14T16:56:18Z")
Oh, no! Iām unable to push the like button. So many valuables. I hope you get paid accordingly.
---
### Author:  [@Handy\_Andy](http://forum.driveonwood.com/u/Handy_Andy)
#### Post date: [April 14, 2018, 5:41pm UTC](http://forum.driveonwood.com/t/waynes-v-10-ram/1074/614 "2018-04-14T17:41:27Z")
So many tasty pieces of potential going away there. I wish we were close enough to trade ājunkā
---
### Author:  [@Wayne](http://forum.driveonwood.com/u/Wayne)
#### Post date: [April 14, 2018, 11:14pm UTC](http://forum.driveonwood.com/t/waynes-v-10-ram/1074/616 "2018-04-14T23:14:51Z")
Yes Steve . I hate to let the old stuff go but it is taking up pasture space .
I did pull the rear tires off the old tractor . Maybe I can sell those separate.
---
### Author:  [@Wayne](http://forum.driveonwood.com/u/Wayne)
#### Post date: [April 14, 2018, 11:15pm UTC](http://forum.driveonwood.com/t/waynes-v-10-ram/1074/617 "2018-04-14T23:15:54Z")
[ ](https://www.youtube.com/watch?v=PMgHEZ93FcA)
[ ](https://www.youtube.com/watch?v=vX6_7rRkY0Q)
---
### Author:  [@BillyAlabama](http://forum.driveonwood.com/u/BillyAlabama)
#### Post date: [April 15, 2018, 1:07pm UTC](http://forum.driveonwood.com/t/waynes-v-10-ram/1074/618 "2018-04-15T13:07:24Z")
Wayne, I thought that was against your religionā¦Iām not sure what to say about it. Itās a little hard to watch a man defile his own conscience. š¤
---
### Author:  [@kmrland](http://forum.driveonwood.com/u/kmrland)
#### Post date: [April 15, 2018, 5:04pm UTC](http://forum.driveonwood.com/t/waynes-v-10-ram/1074/619 "2018-04-15T17:04:46Z")
Nice looking scrap pile there Mr. Wayne K, i bet them tractor tires and the truck axel wood sell at the auctions if any body is paying much.? Whare i live there is an on line auction in every direction 10 too 25 mile out.I sold 1985 ford truck fenders . doors, and hood for around 150 too 200 bucks, though on a slow auction week they may have sold for far less.Scrap prices are going back up with fuel pricesā and may climb more i think from the steel tarrifs.Be carefull with the rattlers they may not give up there hunt clubs.
---
### Author:  [@Strawman](http://forum.driveonwood.com/u/Strawman)
#### Post date: [April 15, 2018, 7:26pm UTC](http://forum.driveonwood.com/t/waynes-v-10-ram/1074/620 "2018-04-15T19:26:50Z")
Have got a winch on your trailer Wayne? Thatās some heavy iron, and look non-running. Trucks that old here have long since returned to the earth as oxides of iron (or been converted to new toaster ovensš).
---
### Author:  [@Wayne](http://forum.driveonwood.com/u/Wayne)
#### Post date: [April 15, 2018, 9:04pm UTC](http://forum.driveonwood.com/t/waynes-v-10-ram/1074/621 "2018-04-15T21:04:56Z")
Hello Will.
No winch on the trailer .
These pieces were easy loaded with my tractor but I have got some big iron coming up that will take a little more thought .
I hauled about 30,000 pounds and a lot more left to go .
---
### Author:  [@Wayne](http://forum.driveonwood.com/u/Wayne)
#### Post date: [April 17, 2018, 7:39pm UTC](http://forum.driveonwood.com/t/waynes-v-10-ram/1074/622 "2018-04-17T19:39:05Z")
Hauled off my old dump truck this morning š It is a F7 BIG JOB ford
:
It looks like the old truck spent some of it;s younger years in Michigan.
[ ](https://www.youtube.com/watch?v=Q_LFE42qdfI)
[ ](https://www.youtube.com/watch?v=Sxd9epg6Tco)
The old truck brought $88 less than I paid for it 39 years back . Depreciated $2.25 a year .
In the above photo I am to the left and my brother to the right .
---
### Author:  [@Strawman](http://forum.driveonwood.com/u/Strawman)
#### Post date: [April 18, 2018, 2:47am UTC](http://forum.driveonwood.com/t/waynes-v-10-ram/1074/623 "2018-04-18T02:47:26Z")
That is a cool photo Mr Wayne, you look like a guy not to be messed with in that pic!
Youāve made the switch from gasoline to wood power over the years, but I see youāve stuck with the plaid shirts and overalls š
---
### Author:  [@kmrland](http://forum.driveonwood.com/u/kmrland)
#### Post date: [April 18, 2018, 11:27pm UTC](http://forum.driveonwood.com/t/waynes-v-10-ram/1074/624 "2018-04-18T23:27:30Z")
No problem, you look about middle twentys in that pic. I wounder what size that rear axel was.Thanks for the memery pics. I wish old vehicles lasted that long up here in the rust belt, when i bought my 04 grand am i allmost thought it was low on rust untill the plastic rockers fell off leaving the rockers rust mostly missing rocker panels, common in the salt rust belt.
---
### Author:  [@Wayne](http://forum.driveonwood.com/u/Wayne)
#### Post date: [April 19, 2018, 11:42pm UTC](http://forum.driveonwood.com/t/waynes-v-10-ram/1074/625 "2018-04-19T23:42:15Z")
Iām still hauling iron with with the V-10 .
It is hard to tell but the first two pics are a international road tractor . It is the front end of my wood chucker. Looks pretty rough after I rolled it around the pasture .
   
[Previous page](http://forum.driveonwood.com/t/waynes-v-10-ram/1074.md?page=30)
[Next page](http://forum.driveonwood.com/t/waynes-v-10-ram/1074.md?page=32)