D.I.Y Builders Shop For New Woodgasers

General Discussion
#24

Thank you–I have decided to sell the diesel and go with the 6 cylinder 300 C.I. Ford. I accidentally said it was a F250–It is really an F150. I think this engine size is comparable to the build we are doing for the construction section. If I am barking up the wrong tree or going down the wrong path please let me know so I don’t spend time on the wrong build. Thanks Lee

#25

Lee,

That truck will work fine, what is the intended use for it? Highway, hauling, farm work? Does it have overdrive?

#26

Hello Chris – Sorry it took so long–Crazy life-anyway I want it mainly for highway, light hauling and occasionally pulling a 16’ trailer. So you agree that I should get rid of the Diesel and purchase the F150 300 C.I.? Thanks Chris

#27

Yes the 300 F150 will work fine. Use the larger size firetube.

#28

Hello Lee,
I recently talked to a diesel mechanic he is currently converting diesel engines of all makes and models.
To run on methane,cng and LP gas. To achieve this he has to change some things in the engine to work correctly.
The mod list is
lower the compression ratio to 10 to 1 drill and tap the heads for spark ingition, change valve system to nonlubecating system diesel fuel is a form of lubecation
All of the above is time consuming and expensive. I would stick with the gasoline engines and parts that are readily available Regards Sean

#29

Thanks Chris and Sean!!! That really helps. Of course I expected quality response from this site and particularly the both of you! Thanks - Lee

#30

Chris–I missed the question earlier–Does it have overdrive? Yes–I consider a 5 speed transmission to have “overdrive”. – Lee (does it make a difference overall in performance)?

#31

Hi Lee,

Overdrive makes a big difference at cruise, keeping the RPMs lower and using less fuel. This is also reflected in your MPGs. My old truck is a 3spd automatic without overdrive, and it has a hard time above 60MPH, gasoline or woodgas.

#32

Way cool! Thanks Chris–hope to meet you guys some day, but Washington State is a long ways from where most of you guys are. Maybe a goal to take my completed “wood gasser” to a meet!! - Lee

#33

Hi,

I happen to be in Summerfield, Florida, and I am interested in seeing your setup. My target is to run a generator to charge some batteries, but love to see your setup.

Mart

#34

Add me to the list of want to be there… If you held a workshop within a couple hundred miles of San Francisco I’d be the first one in the parking lot waiting for the gate to open… Any chance you can take the show on the road? PLEASE??
Richard

#35

Hi Sean,

What is the ballpark price for a full wood gas conversion? PM me if you like. I live in Nova Scotia, Canada, north of the rust belt, and would like to have a rust free 1/2 ton, 4wd from the south. Not looking to do this right away - its a long term goal.

#36

I got to visit Sean and made a video of the experience.

Thanks Sean for sharing your time and knowledge.

#37

my working truck the prime candidate for woodgas conversion is a c6500 GMC with a 366 in it plenty of weight carrying ability as I could haul half the wood lot ideas suggestions and thoughts are welcome

#38

Hey Mart,

Thanks for taking and sharing the video. I enjoyed getting to ride along.

Looking good Sean,

When I was watching Terry L. videos I put my coat on and had the wife to fill the heater. As I was watching you drive I rolled my sleeves up and had the wife open the windows.

BBB

#39

Hi Mart,
Well must say great job!!!
You caught me completely by surprise thank you for taking the time.
Glad you and Tim had a good visit
Sean

#40

Thanks for the video Mart, ( http://youtu.be/lyVT_dlDNEA ) but this leads to a question for Sean and Wayne and group. Starting at 14 minutes in the video we see Sean jump up into the bed of the pickup and open the lid with the engine at a fast idle and proceed to poke the coals and add a sack of wood. Somehow I always thought that you shut the engine down when reloading but apparently that is not necessary with the Keith gassifier? You couldn’t do that with an Imbert, right?
Don M

#41

Morning Mr. Don,

I think because of the deep char bed ours it will tolerate having the lid open much longer than an imbert. If the gasifier is at the state where it is producing more pressure than the motor is taking this means oxygen will not be trapped in the hopper after loading. If the hopper is blowing smoke out vs drawing in air . If oxygen is trapped there might be a small burp.

But even on an imbert I’m sure it could be open for a little while.

#42

That’s a beautiful movie!!!

#43

Don, I do it all the time.