I wish I had some hard wood on my property very little elm and I half to save that for special trips.
IT has really been hot last few days clear up in MI.no jokey,and back too my welding napp chair.
Great stuff Calvin! I reposted also
Today while at the local auto parts house the fire truck pulled up beside my wood burner .
The fireman never noticed or mention the wood burner when he came in the store 
3 Likes
I added a new saw to the family, (Not me in the video)
Picked up a refurbed mod on e-bay for 700 bucks.
2 Likes
Hey Carl Zinn thanks for all the help figuring things out. Went about 70-80 miles today on 100% woodsmoke wooohooo!!! Tyler said hi for Dolittle.
3 Likes
Hey Greg .
Real good to hear from ya.
Tell Tyler I also said Hi 
Hey Joseph .
Nice saw . I really like the husky’s.
Best to keep two saws if you can , just having one saw will really work you.
I like to start with my big saw to cut the tree down and then use a little saw ( small enough you can hold with one hand ) starting at the top of the tree cutting branches and work back toward the truck until the limbs get to 5-6 inches in dia and then pull the big saw out again to finish up .
Using a big saw on small branches is WORK
Using a little saw on big wood you get very little done .
2 Likes
Work keeps getting in my way from my truck.
This is a sewer camera I designed for bigger pipes and longer lines, up to 900’
4 Likes
Good job, but I hope I never need 900’ of sewer line!
Anybody remember these old IBM keyboards? Just bought one off Ebay.
Sure is fun to type on. Extra clicky!!
5 Likes
HI josehaulerph nice saw if it aint the 300 dollar one ,my dad had nothing but truble with the ignition systom not fireing the plug good,had it in and out of the shop 4 times,good luck with your model.I like the homelight saws,out of the cheap saws i had best luck with them.
1 Like
the picture isn’t showing up. 
But I burned through a couple of those. 
if you type a -lot- your fingers actually get tired. Mine all had the larger ps/2 connectors (maybe AT?) I don’t have those anymore but I still have the 3 button serial mouse somewhere.
1 Like
I originally made this setup to run through a landfill, that’s why it’s so long. I haven’t used it for 10 years and revised it for a larger diameter pipe (typically storm sewer) and digital recording. Last time I used it, we were recording on VHS. Hahaha
2 Likes
Chris & Bill, Chris that keyboard is relatively new. I have wore out several … I bet I can find one on the shelf or hooked to my 8087 … Bill, do you have a picture of your camera and rollers and drive ??? Does it go over corregated pipe ? … When they TV’d the sewer line through my property approximately 900 feet they hit the lateral up here at the trailer … illegal hookup 40 years ago and had to pull their good camera back and send the roller skate down … It was fun to watch as they made their video … Then we had a thunderstorm and their truck got stuck in the bottom. Had to run a long cable down to winch the truck back up to the road … Check this humidity out … I have to a small survey next … Mike
2 Likes
It’s 25 years old, I guess that’s pretty new… 
2 Likes
Heading down to New Mexico to visit my Dad and ran into this guy. I brought @racer3g Gary Langworthy his Argos tee shirt.
5 Likes
Thanks for the picture Bill ,
Good to see Gary and grandson again
2 Likes