I’ll have to see if I can search that out, iv been reading into the simple fire design a lot I think the wife could manage that system in a grid down moment if I were to be at work. The generator is electric start with propane backup just so she knows how to operate it. Doesn’t mean she WILL…but charcoal seem simple enough…chunker thoughts…I tell ya, this forum has so many irons in the fire in my head it’s going to be a busy summer
2 Likes
The key to success is to pick one, ignore everything else, and go. There is a lot of different strategies, and a lot of information and trade offs. Then after it starts paying for itself or working, then you can start making adjustments or another one which you think will be an improvement. 
3 Likes
The wk I started is first iv decided that, then I can use the clean out materials to start with charcoal. Waiting on parts to continue but absorbing everything I can for future use!
2 Likes
Well Marcus,
Wayne and BobMac both do run electrical generators off of their WK’s after the system has been vehicle engine pulled up to working stability.
And Wayne has said he can vehicle idle (or generator run) for a long time.
I discovered my insistence of going small on the woodgasifiers was probably the wrong approach reading these.
Sean French tried telling me this years ago.
S.U.
1 Like
I’m looking forward to pulling the truck up to the gen set, but I gotta have me a chargas powered mower! Heck I’d save 4 gallons of dino a month if I could mow the grass on the good stuff!
4 Likes
Hey Marcus I am still looking for that HF inverter unit GaryG charcoal gassed.
Here for his primary works:
Scroll to the bottom of his opening post for the participants icon/avatars. Click opening up his as the first big green G. In the upper RH corner of the summery brought up you can action click up only that persons posts in that topic. Then you can read Gary’s five years evolving 2012-17 in his 51 posts. Ha! Saves from wading through the full 323.
Quite the guy Charcoalman Gary is.
S.U.
3 Likes
scroll up for more pictures and details. Learn from the best.
S.U.
2 Likes
Donn was the one that I got the idea from I have a spare mower sitting around it would just be to cool to not do it
1 Like
The fantastic thing about the "simple fire " is that by this time tomorrow if you really wanted to run that mower on charcoal you could have a video up loaded on YouTube for us all to watch its that simple !
Once constructed and run too destruction after a hour or so you can then change out the mild steel pipe nipple for better type , be that the flute or tungsten carbide nozzle .
Dave
5 Likes
I was explaining the theory of gassification to the wife the other day while burning cardboard in a burn barrel, showing here how you can get a flare out of the lid if you cap off the fire at the right moment, or once the fire has burned deep into the barrel and the flame will momentarily exstinquish and reignite at the top of the barrel. She said “seems simple enough what’s all the extra crap for?”
4 Likes
My wife explained to me how the dishwasher the washing machine the vacuum cleaner and whole heap of other household items once and i have to admit they all went over my head ! maybe we are just not built to think like women we go a little beyond the power plug ,water and detergent and more into what makes things tick 
4 Likes
Are you suggesting that I shouldn’t wait for my daughter to help disassemble this curb shopped vacuum. I thought maybe she would be interested. I just want to look at the impeller design or maybe borrow it for another project that I need to draw about 12" of water and I will need to use a 12v battery.
1 Like
My wife doesn’t give a damn about how a gasifier works. What she cares about is what makes the washer work. Hint. It’s electricity. She won’t be using a scrub board if the grid goes down.
6 Likes
Yes. Exactly on the clothes washer, to score spouse points.
When I’d four months saved back, and Birthday gifted my wife “her very own” Honda EU 2000 . . . she was not impressed.
Ha! Until I cord’ed it in, and showed her it would operate her Maytag Neptune clothes washing machine. Even having shown her it operating her hair dryer had not impressed.
She can easily envision cloths drying on her two out lines set ups. Or by the wood stove. But NOT washing on one of her old wall hanger, washing boards!!
I’d hinted about buying her a new production Maytag wringer washer available out of Saudi Arabia . . . supper that day was cold sandwiches.
Meaning it was my job to provide the heat, power and lights, for her, and the household BEFORE the man “toys” got power.
Steve Unruh
8 Likes
I’m lucky enough my wife does dishes willingly by hand so save on dishwasher power, but I don’t think I could convince here to walk down To the creek and scrub my nasty oily grease work clothes. Maybe there is somewhere a gassifier option for clothes washing…
3 Likes
Hey Marcus,
The thing about a rider lawn mower set up gasified like DonM, Jakob and other have done is it is a Jeff Davis-like: PORTABLE power supply source.
My five acres is still near 1200 feet across.
Battery portable power tools are nice . . . until the spendy, one-of-a-kind NiMh or LiPo battery takes a dump going internal short, or open circuit. My first 1990’s 12vdc Sears Craftsman power drill now lives on with a alligator clip’ed cord. Still have one useable battery for the early 2000’s 14.5 VDC Makita. No more use-extending, hot swapping. Some day it will become cord converted too.
Now that gasified rider mower with a 31T, or 31P truck battery can be those tools electrical power source. Or heck; even install a 1000 watt inverter.
Rider trailer tow your engine driven compressor, or welder; out to a corner and do a welded up stout-as-hell fencing corner, eh. Fueling their engines from the mower gasifier.
My towable 10.5 B&S hydraulic wood splitter! Towed to the tree. Fueling from the rider gasifier already been then driven hot working.
Power then delivered. On demand. Where needed.
All of my 10kW stationary power projects were very stationary heavy.
And even the 10kW pto driven John Deere tractor one would have been clumber-some. Near 30 feet from the bucket nose; to rear deck tail. And that tractor will rut badly driven across the yards in wet season softness.
Steve Unruh
3 Likes
Iv learned the power tools pretty well, burned a lot of money on team yellow when working in the wrecking yard. Gave away the last impact and sawzall that lived 7 years, didn’t have any battery’s left that would hold a charge. Switch team green for affordability and been happy so far. By everyone around me team red is the only way to go by far. I know of several milwaukee guys running the same 18v tools and battery’s 15+ years, zero problems. Of maybe 60 tools in framing, plumbing, automotive,electric and diesel fields all of which were the 18v red flavor, I can count on 2 fingers the number of tools fail (1drill, left outside for a week in snow, 1 drill failed after cranking a old plate compactor till she let the smoke out) and 1 battery. No fault of the battery if it gets kicked off a 200’ cell phone tower! The kicker was the case was obliviated but the cells were good. We tore the battery apart and used it to fix my 18v default battery that’s getupandgo gotupandleft 
5 Likes
If you know how to wood for power you will not have to use this wood to wash clothes.
You could use it to strum, tap out a beat of a rhythm with it up side down, while the clotheswashing machine does all the work.
I think if anyone would have to wash their clothes with a washboard and a tub of water just once, they would welcome the idea of generating power to wash their clothes on wood and not on this kind of wood. Thousands and thousands upon thousands of people are still washing their clothes on rocks at the river shores to this very day.
They are living off grid too.
Bob
6 Likes
My 18v nicad circular saw batteries were toast so I cut a non-working B&D 20v lithium weedwacker battery mount off and hot glued it to the back and now I use the batteries off my good weedwacker and drill and leaf blower to power that little bugger. Real handy for small jobs.
9 Likes
Reduce, reuse and repurpose 
I like it
6 Likes