Ott tracks can be had pretty cheaply and they arnt perfect but they are way better then any tire in mud. Problem is most of them rely on a good tread tire to be aired up to hold the tension. A wore out tire allows the tracks to slip around and even pop off on a off camber spot and that’s not fun at all
4 Likes
It did cross my mind to get four new tires and a set of tracks. Boys love to play in the mud 
6 Likes
What a fantastic piece of equipment sure saves double handling , i would love to have seen how the chunker part of it works , i have an idea in my head how it would work off that crank .
3 Likes
I asked if he had anything on the split, but he only had these.
https://youtu.be/Dj76XodTX64 https://youtu.be/LWizuqSEg7E
3 Likes
I made a 12-way for my splitter last summer. I haven’t used it much, but I have a trailer of partially square chunks drying right now - in the rain 
I’ve found the entire process - from stump to chunk - takes a lot longer with the discs, than collecting thin stuff for the rebak.
10 Likes
I don’t think my splitter is strong enough for 12 way, might just have to settle for 2 way or maybe a 4 way split. Maybe when I pony up for a bigger gas powered splitter.
3 Likes
I believe I have 12-1500 pounds of birch poles. I’m guessing green wood is 40% moisture content?
I still need to chunk up what’s in the trailer which is about 1000lbs?
That should take about an hour to do.
16 Likes
Looks great Bill! 
3 Likes
I made a 14 mile trip and burned about 35 lb of my super dry wood (the same as I gave to Bob).
When I drained the hopper I only got a pint of condensate.
A combination of low humidity and dry wood because I usually get over 1/2 gallon.
6 Likes
I believe I have enough for you Jakob. I will leave it sit on the trailer to dry out. I have a bunch of woven feed bags if you need them. If by chance this isn’t enough, I have tons of firewood we can run through the chunker to supplement.
Do you know when you’ll be here? There are people that want to come over and visit to see your truck.
4 Likes
I’ll get back with you later.
2 Likes
Bill if everything goes according to plan we should be there on the 8th or 9th of Sept.
6 Likes
I Chunked up some more cherry wood today. IT WILL Be at 15 % dry in a couple days. About 20 more bags. Probably will do more tomorrow. I want Jakob to have plenty of wood to do the Northern route back to Minnesota to get to Bill Schiller’s place.
Yum, I thinking Pancakes with some of Bill’s Maple syrup right now. I know I am going to run out before the next Argos Wood Gas Meet up 2022.
Bob
10 Likes
Getting the wheels turning again…
Coppice Acer Saccharum dead on the stump. If we have to cut it with the saw, it’s fuel.
Couldn’t resist some Hop Hornbeam, with Ben toting.
Char pulling a snagged sugar maple.
11 Likes
13 Likes
we also have dried spruce, a friend cuts it and offered me branches, as you say Jo, good for warmth, and we will see for gasification 
8 Likes
Tone, the branches are sturdier stuff. More denst. They work ok for gasification.
It’s obvious you live in Leitinger land - a can of beer sitting on the log 
7 Likes
Ha, Jan, nothing escapes you unnoticed, I squeezed my T-shirt and I had to pour liquids again, 5m3 of wood chips from the branches of one spruce …
7 Likes
I was so envious of Marcus, Bob, Jacob and Mike chunking the other day I decided to do a little extra chunking myself.
I showed the wife pics from Mike’s and hinted it’s supposed to be like a party, with food and drinks to go with the chunking. She rolled her eyes and was off to work 
After finishing the chunking I went inside and fried myself a couple old wrinkly potatoes with a dab of intestinal haggis 
13 Likes